AF-100A Filter
Descriptions
- This filter is make up of main body(2 filter).Transfer stainless steel pipe as well as 316L stainless steel pump. Material contact parts made up of 316L stainless steel which according to cGMP requirements completely. And the supporting leg etc non-contact with material is made up of 304 stainless steel. Pipe joint adopt jointing connect. By 0.3Mpa water pressure test, start-up and shut agility of three-way outer screw thread faucet. Both inside and outside surface with polishing process.
Specifications
| Filtration area(m) | 0.15 | 0.30 | 0.75 |
| Filtration TEMP(℃) | <100 | <=100 | <=100 |
| Pressure(MPa) | 0.2 | 0.2 | 0.2 |
| Diameter of Inlet(mm) | Φ32 | Φ40 | G2″ |
| Diameter of Outlet(mm) | Φ32 | Φ40 | G2″ |
| External dimension | 1000*300*1000 | 1200*350*1200 | 1300*500*1300 |
Remarks
- The above quoted dimension/weight for filler, conveyor and tank are for referenced only and the actual figure may vary depending on the bottle size / volume.
- Customer need to supply their own air pressure or alternatively air compressor should be purchase separately.
- We are able to customize the FLL-250S semi-automatic two nozzles liquid filler (piston filler) to suit your packaging needs.
|
